Mechanical Engineering

Home

Dr. R. G. Desavale

Dr. R. G. Desavale

Associate Professor

Department:Mechanical Engineeering

Email:This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Education

Ph.D. (2014)

National Institute of Technology, Warangal 

M. E. (Mechanical Design Engineering) (2001)

Shivaji University, Kolhapur

B. E. (Automobile Engineering) (1998)

Shivaji University, Kolhapur

Experience

Teaching Experience: 18 years

2017

Associate Professor, Rajarambapu Institute of Technology, Rajaramnagar

2015-2017

Professor, Annasaheb Dange College of Engineering and Technology, Ashta

2011-2015

Associate Professor, Annasaheb Dange College of Engineering and Technology, Ashta

2009-2011

Assistant Professor, Annasaheb Dange College of Engineering and Technology, Ashta

2001-2009

Lecturer, Rajarambapu Institute of Technology, Rajaramnagar

Research Area(s)

  • Rotor Dynamics
  • Vibrations
  • Rolling element Bearing Analysis
  • Vibrations based Condition Monitoring of Industrial Rotating Machines
  • Design and Dynamics
  • Mathematical modeling of the behavior of rotating machines

Key Publications

A) Publications (in international journals)

  • Desavale, R. G., 2021, “Vibration Analysis of Rolling Bearing using Finite Element Analysis and Dimension Analysis”, ASME Tribology, revision under review (SCI)
  • Desavale, R. G., 2021, “A Novel Approach to Predict the Vibration Characteristics of Outer Race of Rolling Element Bearings using Matrix Method of Dimensional Analysis”, ASME, Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems (JNDE), revision under review. (Scopus).
  • Desavale, R. G., Dharwadkar N., 2021, “A novel method to classify rolling element bearing faults using K-Nearest Neighbor Machine Learning Algorithm”, ASME J. Risk Uncertainty Part B, Paper under review. (Scopus)
  • Desavale, R.G and Shinde, P. V., 2021, “A novel approach to predict the unbalance and misalignment of rolling element bearings using matrix method and machine learning”, Elsevier-Measurement, Paper under revision. (SCI)
  • Salunkhe, V. G. and Desavale, R. G., 2020, “Experimental Frequency-Domain Vibration Based Fault Diagnosis of Roller Element Bearings using Support Vector Machine, Elsevier- Expert Systems with Applications, revision under review. (SCI)
  • Salunkhe, V. S., Desavale, R. G. and T. Jagdisha, “A numerical model for fault diagnosis in deep groove ball bearing using dimension theory”, Elsevier Materials Today: Proceedings, Available online 20 June 2021, (Scopus)
  • Suryawanshi, G. L., Patil, S. K. and Desavale, R. G., 2021, “Dynamic model to predict vibration characteristics of rolling element bearings with inclined surface fauly”, Measurement, 184, PP. 109879. (SCI)
  • Kumbhar, S. G., Desavale, R. G. and Dharwadkar, N., 2021, “Fault Size Diagnosis of Rolling Element Bearing Using Artificial Neural Network and Dimension Theory”, Neural Computing and Applications, (SCI), 06228-1-8. (SCI)
  • Desavale, R. G., Jadhav, P. M. and Dharwadkar Nagraj, 2021, “Dynamic Response Analysis of Gearbox to Improve Fault Detection using Empirical Mode Decomposition and Artificial Neural Network Techniques”, ASME J. Risk Uncertainty Part B, In production. (SCI)
  • Salunkhe, V. S., Desavale, R. G., 2020, “An Intelligent Prediction for Detecting Bearing Vibration Characteristics using Machine Learning Model,” ASME, Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems (JNDE), PP. 1-20, doi.org/10.1115/1.4049938. (Scopus)
  • Suryawanshi, G. L., Patil, S. K., Desavale, R. G., 2020, “Evaluation of the Mechanical and Tribological characteristics of AA6061/TiB2 metal matrix composite and parametric optimization of its casting process by using Taguchi Technique and NSGA-II,” International Journal of Materials Engineering Innovation (IJMATEI), Inderscience publication, 12(3), pp.1-10. (Scopus)
  • Salunkhe, V. S., Desavale, R. G. and T. Jagdisha, Experimental Frequency-Domain Vibration Based Fault Diagnosis of Roller Element Bearings Using Support Vector Machine, ASME J. Risk Uncertainty Part B, doi.org/10.1115/1.4048770, (Scopus)
  • Patil, S. M., Desavale, R. G., Kumbhar, S. G., Roller Element Bearing Fault Size Estimation Using Adaptive Neuro-fuzzy Inference System (ANFIS), ASME J. Risk Uncertainty Part B, 7(1), PP. 011001-9, doi.org/10.1115/1.4048656. (Scopus)
  • Kumbhar, S. G., Sudhagar P, Edwin, Desavale, R. G., 2020, “An overview of Dynamic Modeling of Rolling Element Bearings”, Noise and Vibration Worldwide, Sage publication, https://doi.org/10.1177/0957456520948279, (SCI)
  • Jadhav, P. M., Kumbhar, S. G., Desavale, R. G. and Patil, S. B., 2020, Distributed fault diagnosis of rotor-bearing system using dimensional analysis and experimental methods, Measurement, 166, (https://doi.org/10.1016/j.measurement.2020.108239). SCI
  • Kumbhar, S. G., Edwin Sudhagar P., and Desavale, R. G. 2020, “Theoretical and experimental studies to predict vibration responses of defects in spherical roller bearings using dimension theory”, Measurement, 161, pp. 107846). SCI
  • Shinde, P. V., Desavale, R. G., Patil, V. R., Gawali, P. M. and Patil, S. M., 2020, “Modeling, attenuation and flow field analysis of diesel engine muffler using fluid structure interaction approach and experimental analysis”, SN Applied Sciences, https://doi.org/10.1007/s42452-020-2683-6. ESCI (Scopus)
  • Desavale, R. G., 2019, Dynamics Characteristics and Diagnosis of a Rotor-Bearing's System Through a Dimensional Analysis Approach: An Experimental Study, ASME Journal of Computational and Nonlinear Dynamics, 14(1), pp. 014501. (DOI: https://doi.org/10.1115/1.4041828)SCI
  • Desavale R.G., Chavan S.P., 2016, “Experimental Based Faults Diagnosis of Rolling Bearings Using Artificial Neural Network”, ASME Tribology, 138(3), PP. 031103. SCI
    Desavale R.G., et al., 2016, “Vibration Characteristics Diagnosis of Roller Bearing Using the New Empirical Model” ASME Tribology, 138 (1), PP. 011103-1-9. SCI
  • Desavale, R.G., A.R. Mali., 2016, “Detection of Damage of Rotor-Bearing Systems using Experimental Data Analysis”, Procedia Engineering, 144, PP.195-201. (Scopus)
    Desavale, R.G., V.G. Salunkhe, 2016, “Damage Detection of Roller Bearing System Using Experimental Data”, Procedia Engineering, 144, PP. 202-207. (Scopus)
  • Desavale, R. G., Venkatachalam, R., and Chavan, S. P., 2014, “Experimental and numerical studies on spherical roller bearings using multivariable regression analyses approach”, ASME, Journal of Vibration and Acoustics, Vol. 136, No. 2, pp. 021022-1-10. SCI
  • Desavale, R.G., Venkatachalam, R., and Chavan, S.P., 2013, “ Antifriction bearings damage analysis using experimental data based models”, ASME, Journal of Tribology, Vol. 135, No.4, pp. 041105-1-12. SCI
  • Desavale R.G., Chavan S.P., 2016, “Experimental Based Faults Diagnosis of Rolling Bearings Using Artificial Neural Network”, ASME, Tribology, Vol. (), PP. Paper in Production.
  • Desavale R.G., et al., 2016, “Vibration Characteristics Diagnosis of Roller Bearing Using the New Empirical Model” ASME, Vol. 138 (1), Tribology, PP. 011103-1-9.
  • Desavale, R.G., A.R. Mali., 2015, “Detection of Damage of Rotor-Bearing Systems using Experimental Data Analysis”, Elsevier, Journal of Procedia Engineering, Paper accepted for publication.
  • Desavale, R.G., V.G. Salunkhe, 2015, “Damage Detection of Roller Bearing System Using Experimental Data”, Elsevier, Journal of Procedia Engineering, Paper accepted for publication.
  • Desavale, R. G., R.A. Kanai., S.P. Chavan, 2015,“Experimental Investigations for Faults Diagnosis in Rotor-Bearings System Using Artificial Neural Network” ASME,  Dynamic Systems, Measurement and Control, Paper under review.
  • Desavale, R. G., Venkatachalam, R., and Chavan, S. P., 2014, “Detection of rotor-bearing damage by a new experimental data based models and multivariable regression analyses  approach”, ASME,  Journal of Vibration and Acoustics, Vol. 136, No. 2, pp. 021022-1-10.
  • Desavale, R. G., Kumbhar, S. G., and Shinde, A. A., 2014, “Theoretical and experimental studies on vibrations produced by defects in taper roller bearing using vibration signature analysis”, International Journal of Engineering and Research Technology, ISSN No. 2278-0181, Volume 3, Issue 05, pp. 1270-1283.
  • Desavale, R. G., Shinde, A. A., and Kumbhar, S. G., 2014, “Theoretical and experimental studies on vibrations produced by defects in double row ball bearing using response surface method”, International Journal of Research in Engineering and Technology, ISSN: 2319-1163 | ISSN: 2321-7308, Volume 3, Issue 07, pp. 140-145.
  • Desavale, R.G., Venkatachalam, R., and Chavan, S.P.,  2013, “ Antifriction bearings damage analysis using experimental data based models”, ASME, Journal of Tribology, Vol. 135, No.4, pp. 041105-1-12.
  • Desavale, R.G., and Pathak, L.M., 2013, “Analysis of vibration characteristics for annular disc cutters”, Research Inventy: International Journal of Engineering and Science, Vol.3, No. 4, pp 32-38.
  • Desavale, R.G., and Rakate, G. N., 2013, “Structural design of overhanging pressure vessel support used in pyrolysis process using non- linear finite element analysis for structural stability”, International Journal of Engineering Research and Technology, Vol. 2 , No. 6, pp. 2036-2042.
  • Desavale, R.G., and Patil, S.M., 2013, “Conceptual structure design through thickness optimization of high pressure and high temperature self regulated pressure valve using non-linear transient finite element method”, International Journal of Engineering Research and Technology, Vol. 2,  No. 6, pp. 2043-2049.
  • Desavale, R.G., and Chavan, S.S., 2013, “Experimental investigation of effect of angular positioning of legs on structural stability of pressure vessel and by using non- linear finite element analysis”, International Journal of Engineering Research and Technology, Vol. 2,  No. 6,pp. 2050-2057. 
  • Desavale, R.G., and Patil, A.M., 2013, “Theoretical and experimental analysis of torsional and bending effect on four cylinders engine crankshafts by using finite element approach”, International Journal of Engineering Research, Vol. 2, pp.

B) Publications (in Indian journals)

  • Desavale, R. G., Jadhav, P.M., and Kanai,  R. A., 2009, “Theoretical & Experimental analysis of cantilever type main system to which multi-mass parallel & series  Tuned DVA’s are attached”, Journal of The Institution of Engineers (India)-Mechanical Engineering Division  30,  PP.-30-35.

C) Publications /Presentation(in peer-reviewed conferences held in India)

  • Desavale, R.G., Mali, A. R., 2014, “Detection of Damage of Rotor-Bearing Systems using Experimental Data Analysis”, 12th International conference on vibration problems, IITG, Paper Submitted.
  • Desavale, R.G., Venkatachalam, R., and Chavan, S.P., 2013, “Fault diagnosis of antifriction bearings due to localized defects using multivariable regression analysis”, 1st International and 16th National Conference on Machines and Mechanisms (iNaCoMM 2013), December, 18-20, Mechanical and Industrial Engineering Department, IIT, Roorkee, India. 
  • Desavale, R.G., Venkatachalam, R., and Chavan, S.P., 2012, “Dynamic model of antifriction bearings - model development and case study using experimental data based models”, Proceedings of ACMFMS 2012, International conference on Mechanics of Functional Materials and structures, 5-8, December, IIT Delhi, pp. 593-596.
  • Desavale, R. G., Jadhav, P.M., and Kanai, R. A., 2008, “Theoretical Performance Analysis of the Pro-active World Suspension System”, Second International Conference on “Resource Utilization and Intelligent Systems” INCRUIS-2008. At Kongu Engineering College, Perundurai Erode-Tamilnadu, India, January 3-5, pp. 
  • Desavale, R. G., Jadhav, P.M., and Kanai, R. A., 2008, “Active roll control of heavy duty road vehicles”, Second International Conference on “Resource Utilization and Intelligent Systems” INCRUIS-2008. January 3-5, At Kongu Engineering College, Perundurai Erode-Tamilnadu, India, January 3-5, pp.
  • Desavale, R. G., Jadhav, P.M., and Kanai, R. A., 2007, “Theoretical & Experimental analysis of cantilever type main system to which multi-mass parallel & series DVA’s are attached”, International conference on Advance in Machine Design & Industry Automation (ICAMDIA-2007) organized by Dept. of Mech. Engg., College of Engg. Pune, Jan. 10-12, pp. MD 71 – MD 75.
  • Desavale, R. G., Jadhav, P.M., and Kanai, R. A., 2007, “Human Engineering Aspects in Automobile Systems Design”, International conference on Advance in Machine Design and Industry Automation (ICAMDIA-2007) organized by Dept. of Mech. Engg., College of Engg. Pune, Jan. 10-12, pp. VD 266 – VD 270.
  • Desavale, R. G., 2017, “Investigation of vibration characteristics of rotor-bearing system due to unbalanced and clearance using dimensional analysis”, International Conference on vibration problem, IIT Guwahati, 
  • Desavale, R. G., 2017, “Influences of instantaneous defective frequency on speed and life of ball bearings”, International Conference on vibration problem, IIT Guwahati.
  • Desavale, R. G., 2017, “Dynamic modeling of a rotor bearing structure and vibration based surface defect analysis”, International Conference on vibration problem, IIT Guwahati.
  • Desavale, R. G., 2017, “Numerical analysis of acoustic attenuation and performance characteristics of diesel engine muffler”, International Conference on vibration problem, IIT Guwahati.

D) National Conference

  • Desavale, R.G., et al, 2010, “Using vibration analysis to detect early failure of rolling element bearing of induction motor” National Conference on Advanced trends in Mechanical Engineering, organized by P.V.P.I.T. Budhgaon, 30th March 2010, PP-72-75.
  • Desavale, R. G., et al 2010, “Advanced recent trends in Automobile Engineering- Use of Hydrogen as Alternative Fuel to power vehicle”, National Conference on Advanced trends in Mechanical Engineering, organized by P.V.P.I.T. Budhgaon, 30th March, 2010, PP-106-110.
  • Desavale, R.G., et al 2010, “On-line Condition Monitoring System using Vibration Analysis for Pump Bearing” National Conference on Advanced trends in Mechanical Engineering, organized by ADCET, Ashta, 2nd July, pp.
  • Desavale, R. G., P. Jadhav P.M., and Kanai, R. A., 2004, “Neural Network approach for Predicting Material Properties,” proceedings of National Seminar on “Emerging Trends in Mechatronics”, organized by M.I.T., Aurangabad on 23 – 24 July, pp 92-95.
  • Desavale, R. G., Katu, U. S., and Kanai,  R. A., 2003, “Effect of Vehicle Vibration on Human Body”, 11th National Seminar on “Mechanisms & Mechanical Vibration”, IIT Delhi, 18-20 December, pp. 
  • Desavale, R. G., and Bimlesh, Kumar., 2000, “Theoretical and Experimental Analysis of Cantilever Type Main System to which Multi mass (Two masses) DVA are attached”, proceedings of the 16th National Convention of the Mechanical Engineers, organized by University of Roorkee from 29 – 30 September, pp 193 – 199.
  • Desavale, R. G., Ghunakikar, S., 1999, “Sound and Vibration Control”, in Technoexcellence-1999, at R.I.T., Rajaramnagar on 26th March. 

E) Book Published 

i) Chapters in Book

    • Mechanical Engineering for Sustainable Development-Apple Academic Press-CRC Press

G) Patent 

i) Patents (Filed)

01

Professional Distinctions

  • Life Member of ISTE, New Delhi
  • SAEINDIA Membership

Key Research Projects

  • Some Studies on the Nonlinear Dynamic Modelling of Antifriction Bearings for Fault Diagnosis  Vibration and Noise Analysis of Parallel Shaft Gear Drive Systems