Mechanical Engineering

Home

Dr. S. D. Patil

Dr. S. D. Patil

Associate Professor

Department:Mechanical Engineeering

Email:This email address is being protected from spambots. You need JavaScript enabled to view it.

Education

Ph.D. (2014)

IIT, Kharagpur

M.E. (Mech) (2005)

Shivaji University, Kolhapur

B.E. (Mech) (2000)

Shivaji University, Kolhapur

Experience

Teaching Experience: 15 years

2004

Associate Professor at R.I.T. Rajaramnagar, Sakharale. (Sangli)

2010-2014

Worked as Teaching Assistant at IIT Kharagpur during Ph D programme

2002-2004

Teaching Assistant at Govt, College of Engg. Karad during M. E. program

Research Area(s)

  • Heat and Mass Transfer, CFD, RAC
  • Hydrogen Energy, Metal Hydride
  • Renewable Energy
  • I C engines, Alternative Fuels

Key Publications

A) Publications (in international journals)

B) Publications (in peer-reviewed conferences held abroad) 

  • Sharad D Patil, M.Ram Gopal. Studies on entropy generated in metal hydride reactor for hydrogen storage. The 2nd International Conference on Engineering and Applied Science, Tokyo, Japan, 15–17 March, 2013.Paper no. 1648

C) Publications /Presentation(in peer-reviewed conferences held in India) 

  • Randhiy Y Chavan, Sharad D Patil, ‘Analysis of Flow & Heat Transfer Enhancement of Turmeric Cooking Steam Generator’ International Virtual Conference on  Innovation Challenges and Advances in Engineering & Technology (ICAET-2021) organized Vishwaniketan's Institute of Management Entrepreneurship and Engineering Technology (ViMEET),  Khalapur, Maharashtra, held on 05th – 06th, September 2021, in Association with Institute For Engineering Research and Publication.

  • Rahul A. Sawant and Sharad D. Patil, Design and Analysis of oven for heat loss used for drying painted three wheeler chassis, International Conference on Material Science and Engineering, organized by Dept. of Mech. Engg., Dr. B R Ambedkar NIT Jalandhar Punjab during 11-12th June- 2019

  • Swapnil V. Jadhav and Sharad D. Patil, A Review on Thermal Analysis of Nano Particle Based Fluid, International Conference on Recent Advances in Materials, Manufacturing & Energy Systems (ICRAMMES 2019) organized by Dept. of Mech. Engg., Velagapudi Ramakrishna Siddhartha Engineering College, Vijayawada, AP during 3rd -4th January- 2019

  • Pragati A Jagdale, S.S. Shirgupikar and Sharad D. Patil, Effect of different electrode materials on the performance of EDM: A Review, International Conference on Recent Advances in Materials, Manufacturing & Energy Systems (ICRAMMES 2019) organized by Dept. of Mech. Engg., Velagapudi Ramakrishna Siddhartha Engineering College, Vijayawada, AP during 3rd -4th January- 2019

  • P. P. Garud, and Sharad D. Patil, Overview of use of composite materials in vapor compression refrigeration system (VCRS), International Conference on Recent Advances in Materials, Manufacturing & Energy Systems (ICRAMMES 2019) organized by Dept. of Mech. Engg., Velagapudi Ramakrishna Siddhartha Engineering College, Vijayawada, AP during 3rd -4th January- 2019

  • Shwetali S Patil, Sharad D. Patil, Numerical investigation of mini-channel metal hydride reactor for hydrogen storage, Proceedings of the 24thNational and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS Pilani, Hyderabad, India.

  • Sagar C Wangdare, Sharad D. Patil, Numerical investigation on influence of variation in offset ribs on fluid flow and heat transfer in microchannel heat sink, Proceedings of the 24thNational and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS Pilani, Hyderabad, India.

  • Vishakha V. Chopade, Sharad D. Patil, Numerical Analysis of Heat Transfer Enhancement in Artificially Roughened Solar Air Heater, 6th International Conference on Advances in Energy Research (ICAER 2017) IIT Bombay 12-14 Dec 2017. pp-155-161

  • Shreyas Patil, Sharad D. Patil, Numerical Investigation of design mono hull under extreme irregular sea conditions using Boundary Element Method and Strip theory, International conference on Emerging Technological Innovations in Mechanical Engineering,26th -27th May 2017 at R R Institute of Technology,Bengaluru.

  • Sanketkumar S. Kurade,  Sharad D. Patil, Simulation of Thermo-mechanical Stresses in Gas Turbine Blades of an Aero-engine under Service Condition, 2nd National Conference on Recent Trends in Mechanical Engineering (MCRTME), WCE, Sangli -June- 2017.

  • Madhuri V. Nimbalkar, Sharad D. Patil, Design Optimization and Modeling of Compact Metal Hydride Reactor for Hydrogen Storage, 3rd Int conference on Industrial Engineering, ICIE 2015, pp 881-886, SVNIT Surat.

  • Madhuri V. Nimbalkar, Sharad D. Patil, ‘Design Optimization and Modeling of Compact Metal Hydride Reactor for Hydrogen Storage, 3rdInt conference on Industrial Engineering, ICIE 2015, pp 881-886, SVNIT Surat. 

  • Sharad D Patil, M.Ram Gopal.Heat and mass transfer studies on Mg2Ni–H2 metal hydride for hydrogen storage, Proceedings of the 22nd National & 11th ISHMT-ASME Heat and Mass Transfer Conference, December 28–31, 2013, IIT Kharagpur, India, Paper no. HMTC1300755. 
  • Sharad D Patil, M.Ram Gopal. Studies on bio-hydrogen storage using metal hydride reactor. International Conference on Alternative Fuels for I. C. Engines, MNIT, Jaipur, India, 6–8 February, 2013.Paper no. IC048.
  • Sharad D Patil, M.Ram Gopal. Numerical simulation of bio-hydrogen storage using metal hydride.  International Symposium on New Horizons in Bio energy Research, organized by PK Sinha Center for Bio Energy, IIT Kharagpur, India, 14–16 January, 2013.
  • Sharad D Patil, M. Ram Gopal. Studies on metal hydride based system for storage of bio-hydrogen. International conference on Advances in Biological Hydrogen Production and Applications, December 14 – 15, 2012 JNTUH, Hyderabad, India.
  • Sharad D Patil “The performance testing of Esterified Karanji oil as an Alternative Fuel”, presented at International Conference on Biofuels Vision 2015 at College of Engineering Bikaner, Rajasthan

D) National Conference

  • Nikhil U Kamble, Sharad D. Patil, "Techno-economic Analysis of the Solar, Wind and Hybrid Systems" at National conference on Emerging Trends in Mechanical Engineering held during 7-8 Feb 2019 at VIT Pune.

  • Suraj P. Godsae, Sharad D. Patil, Numerical Analysis of Splitted Cylindrical Metal Hydride Hydrogen Storage Reactor, Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) Rajarambapu Institute of Technology, Sakhrale, in Association with Novateur Publications Journalnx-ISSN No: 2454-7875, April, 13th , 2018. TH-119.

  • Nikhil U. Kamble, Sharad D. Patil, "Techno economic analysis of solar PV system" Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) Rajarambapu Institute of Technology, Sakhrale, in Association with Novateur Publications Journalnx-ISSN No: 2454-7875, April, 13th , 2018. TH- 120.

  • Sharad D. Patil,  Mathematical Modeling of Evaporation of Water Droplet, Its Implimentation And Validation TH- Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) Rajarambapu Institute of Technology, Sakhrale, in Association with Novateur Publications Journal -ISSN No: 2454-7875, April, 13th , 2018.TH-110.

  • Abhijit J. Patil, Sharad D. Patil, Numerical Analysis of Steam Flow In Steam Turbine Nozzle Blade Cascade, Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18) Rajarambapu Institute of Technology, Sakhrale, in Association with Novateur Publications Journalnx-ISSN No: 2454-7875, April, 13th , 2018. TH-111.

  • Amit G. Sabasagi, Sharad D. Patil, Aerodynamic study of Flow over a Sphere, 3rd RIT Conference for Engineering Post Graduates, RIT PGCon-17. Paper No: TH134

  • Shwetali S Patil, Sharad D. Patil, Numerical Analysis of Mini-channel Metal Hydride Reactor for Hydrogen Storage, 3rd RIT Conference for Engineering Post Graduates, RIT PGCon-17. Paper No: TH514

  • Sagar A. Wangdare, Sharad D. Patil, Numerical study of fluid flow and heat transfer in microchannel heat sink, , 3rd RIT Conference for Engineering Post Graduates, RIT PGCon-17. Paper No: TH2796

  • Sumit C. Jakate, Sharad D. Patil, Optimization of pipe for pressure drop using Design of Experiment, 3rd RIT Conference for Engineering Post Graduates, RIT PGCon-17. Paper No: TH135

  • Swhali M Peerjade, Sharad D. Patil, Design Space Analysis and Parameter based Optimization of Downpipe by Response Surface Method, 3rd RIT Conference for Engineering Post Graduates, RIT PGCon-17. Paper No: TH164.

  • Krushna P. Shekde, Sharad D. Patil, Santosh T. Patil, „3D Numerical Simulation of Corrugated Tube Metal Hydride Based Hydrogen Storage System‟ published in Proceedings of the 2nd National Conference for Engineering Post Graduates, RIT NConPG-16. Paper No:CC201,PP-60-65.

  • Madhuri V. Nimbalkar, Sharad D. Patil, „Numerical Analysis of Metal Hydride Based Hydrogen Storage Reactor with Hollow Fins‟ Proceedings of the 2nd National Conference for Engineering Post Graduates, RIT NConPG-16. Paper No:CC205, PP 88-93.

  • “The performance and evaluation of oxygenated on diesel exhaust emissions”, presented at National Conference on Emerging Trends in Mechanical Engineering at BMS College of engineering Bangalore.

  • “Effect of oxygenates on diesel exhaust emissions” presented at National Seminar on Recent Advances in Mechanical Engineering at K.K. Wagh College of engineeringNasik

  • “Stability Analysis of single phase flow by numerical methods (CFD) in National conference on CAD/CAM/CAE at RIT Sakharale Dist- Sangli.

  • “An evaluation of oxygenated additives on diesel engine exhaust emissions” presented at National Conference on Advances in Mechanical Engineering at College of engineering, Pandharpur.

E) Patent

i) Patents (Filed)

    • Provisional Patent on "Manually operated Tiller"

Professional Distinctions

  • Life member of ISHMT
  • Life member of ISTE

Key Research Projects

  • Automate design of experiment using Fluid Nexus for CFD.
  • Automation of the CFD for Aerodynamic Workflows.
  • Numerical investigation of inshore patrol vessels (IPV) hull form under extreme irregular sea conditions using Boundary Element Method.
  • Simulation of thermo-mechanical stresses in Gas Turbine Blades of an Aero-Engine under service condition.
  • Parameterization and shape optimization of heavy duty diesel SCR after treatment system for Bharat stage 6.
  • Numerical analysis of Mini channel Metal Hydride reactor for Hydrogen Storage 
  • Study of micro channel Metal Hydride reactor for Hydrogen Storage 
  • Numerical analysis of corrugated tube channel Metal Hydride reactor for Hydrogen Storage 
  • Design and development of compact Metal Hydride reactor for Hydrogen Storage under TWEQIP-II at RIT