Mechanical Engineering

Home

Dr. S. K. Patil

Dr. S. K. Patil

HOD

Department:Mechanical Engineeering

Email:This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Education

Ph.D. (2015)

SVNIT, Surat

M.E (Production Engineering) (2007)

Shivaji University, Kolhapur

B.E. (Mechanical Engineering) (2003)

Shivaji University, Kolhapur

Teaching Experience: 17.5 Years

2004

RIT, Rajaramanagar

Industry Experience: 08 Months

2003-2004

Manugraph India Ltd, Kodoli

Research Area(s)

  • Production and Operation Management
  • Decision Support Models
  • Planning, Scheduling and Control Problems of Manufacturing System
  • MCDM in Fuzzy Environment
  • Logistics and Supply Chain Analysis
  • Computational Intelligence in Manufacturing and Logistics
  • Knowledge Management
  • Computer Integrated Manufacturing
  • Sustainable mircomachining of superalloys

Key Publications

A) Publications (in international journals)

  • Suryavanshi, G.L., Patil, S. K., Desawale, R.G. (2021), Dynamic model to predict vibration characteristics of rolling element bearings with inclined surface fault, Measurement, Volume 184.
  • Suryavanshi, G.L., Patil, S. K., Kulkarni, S.S. (2021), Impact of Choice Based Four Tracks Project System on Development of Final Year Engineering Students and Challenges Faced During Implementation: Case Study, Journal of Engineering Educations Transformation,34, No.1 pp 211-218.
  • Suryavanshi, G.L.,Patil, S. K., Desawale, R.G. (2021), Evaluation of the Mechanical and Tribological characteristics of AA6061/TiB2 metal matrix composite and parametric optimization of its casting process by using Taguchi Technique and NSGA-II, International Journal of Materials Engineering Innovation, 12 No. 3. pp 207-233.
  • Pawar, R.V., Patil, S. K (2021), Structured Approach to Enhance the Quality of Undergraduate Capstone Project: A Case Study, Journal of Engineering Educations Transformation, 34, No.1 pp 211-218,.
  • Dakave U.H., Patil, S. K., Shaha A.P.(2021) ‘Comparative Analysis of Fsw and Tig Welding Process for Joining Dissimilar Aluminium Alloys AA6082 And AA1100 Based on Multi Response Optimization Using Entropy-Topsis Approach’, International Journal of Advanced Research in Engineering and Technology, 12, No. 1.
  • Patil, S. K (2021), A Review on Actuator and Manipulator Techniques in Soft Robotics, Notes Electrical Engg, Springer Nature Publishers, Vol. 200, pp 1-15.
  • Patil V.R., Shaha, A.P., Patil, S. K. (2021) ‘Experimental Investigation of Heat Assisted Drilling Machine’, International Journal of Advanced Research in Engineering and Technology, 12, No. 1.
  • Kulkarni, S.S., Patil, S. K., Pawar R.V. (2020) ‘Adoption of the Conceive-Design-Implement-Operate approach to the Third Year Project in a team-based design-build environment’, Procedia Computer Science, 172, pp. 559-567.
  • Patil, S.S., Kulkarni, S.S., Patil. S.K. (2020), Toward Outcome Based Education (OBE): An Impact of Active Learning Approach for 'Computer Organization' Course, Journal of Engineering Educations Transformation, 34, No. 2, pp 45-54.
  • Awati, J.S., Kulkarni S.S., Patil, S. K (2019), Energetic teaching activity Role play and round quiz: A case study, Journal of Engineering Educations Transformation, 33, No. 1, pp 84-90.
  • Pawar R.V., Kulkarni, S.S., Patil, S. K (2020), Project Based Learning: An Innovative Approach for Integrating 21st Century Skills, Journal of Engineering Educations Transformation, 33, No. 4, pp 58-63.
  • Kulkarni, S.S., Patil, S.K. (2018) "Choice Based Credit System (CBCS) - An Experiential Learning Approach at RIT," IEEE Explore- 2018 World Engineering Education Forum - Global Engineering Deans Council (WEEF-GEDC), Albuquerque, NM, USA, 2018, pp. 1-4, doi: 10.1109/WEEF-GEDC.2018.8629671.
  • Patil, S.S., Patil, S. K., Lokare V.K. (2018), Enhancing Engineering Student’s Academic Performance Index through Outcome Based Education: A Case Study, Journal of Engineering Educations Transformation, ISSN 2394 – 1707.
  • Dakave, U.H., Patil, S. K (2018), Electro Discharge Machining of Ti6A14V, International Journal of Science and Innovation Engineering and Technology, 7, No.10, pp 658-664.
  • Gaikwad, H.V., Patil S.K. (2017), Analysis of Learning Styles of Engineering Students For Improving Engineering Education, Journal of Engineering Educations Transformation, ISSN 2394 – 1707.
  • Patil, S. K. and Kant, R. (2016) ‘A Fuzzy ANP Based Approach for Selection of Knowledge Management Strategies to Build Resilient Supply Chain: An Empirical case study’, International Journal of Integrated Supply Management, Vol. 10, No. 2, pp. 173-205 (Inderscience Publisher, UK).
  • Patil, S. K. and Kant, R. (2016) ‘Evaluating the impact of Knowledge Management adoption on Supply Chain Performance by BSC-FANP approach: An Empirical case Study’, TÉKHNE - Review of Applied Management Studies, Vol. 12, No.1- 2, pp.3-14 (Elsevier Publisher, Netherlands).
  • Patil, S. K. and Kant, R. (2014) ‘A hybrid Approach based on fuzzy DEMATEL and FMCDM to predict success of Knowledge Management adoption in Supply Chain’, Applied Soft Computing, Vol. 18, pp. 126-135 (Elsevier Publisher, Netherlands). Impact Factor: 2.857
  • Patil, S. K. and Kant, R. (2014) ‘A fuzzy AHP-TOPSIS framework to ranking the solutions of Knowledge Management adoption in Supply Chain to overcome its barriers’, Expert System with Applications, Vol. 41, No. 2, pp.679-693 (Elsevier Publisher, Netherlands). Impact Factor: 2.981
  • Patil, S. K. and Kant, R. (2014) ‘Methodological literature review of Knowledge Management Research’, TÉKHNE - Review of Applied Management Studies, Vol. 12, No.1- 2, pp.3-14 (Elsevier Publisher, Netherlands).
  • Patil, S. K. and Kant, R. (2014) ‘Ranking the barriers of Knowledge Management adoption in Supply Chain using fuzzy AHP method’, International Journal of Business Innovation and Research, Vol.8, No.1, pp.52-75 (Inderscience Publisher, UK).
  • Patil, S. K. and Kant, R. (2014) ‘Knowledge Management Adoption in Supply Chain : Identifying Critical Success Factors using Fuzzy DEMATEL approach’, Journal of Modelling in Management, Vol 9, No. 2, pp. 160-178 (Emerald Publisher, UK) .
  • Patil, S. K. and Kant, R. (2014) ‘Predicting the success of Knowledge Management adoption in Supply Chain using fuzzy DEMATEL and FMCDM’, International Journal of Business Performance and Supply Chain Modelling, Vol. 6, No. 1, pp. 75-93 (Inderscience Publisher, UK).
  • Patil, S. K. and Kant, R. (2013) ‘A Fuzzy DEMATEL method to identify Critical Success Factor of Knowledge Management adoption in Supply Chain’, Journal of Information and Knowledge Management, Vol. 12, No. 3, pp. 1-17 (World Scientific Publisher, Singapore).
  • Patil, S. K. and Kant, R. (2012) ‘Organizational culture a HR strategy for successful knowledge management’, Journal Strategic HR Review, Vol. 11, No.6, pp. 322-328 (Emerald Publisher, UK).

B) Publications (in Indian journals)

  • Patil, S. K. and Telsang M. T. (2007) ‘Humanware-A critical Dimension for achieving Competitive Advantage in JIT Environment’, Manufacturing Technology Today (CMTI), Vol. 6, No.9, pp. 10-14.
  • Patil, S. K. and Telsang M. T. (2007) ‘Performance Benefits From Successful Implementation of Just-in-Time in An Engineering Firm – A Case Study’, Udyog Pragati Journal (NITIE)), Vol. 31, No.2, pp. 14-22.

C) Publications /Presentation(in peer-reviewed conferences held in India)

  • Patil, P.A. and Patil, S. K. (2019), Nano-particle Based Cutting Fluid Applied in Minimum Quantity Lubrication Method for Machining: A Review, in Proceedings of International Conference on Industrial Engineering (ICIE-2019)
  • Chavan, P.C. and Patil, S. K. (2019), Taguchi based optimization of machining of AISI 4140 steel by TOPSIS approach, in Proceedings of International Conference on Industrial Engineering (ICIE-2019)
  • Patil, P.A. and Patil, S. K. (2019), ‘Effective Use of Microsoft Excel for Teaching Application Oriented Transportation Problems’, in Proceedings of the International Conference on Transformation in Engineering Education (ICTIEE-19) held at Chitkara University, Chandigarh.
  • Chavan, P.C. and Patil, S. K. (2019), ‘ABDP: The Shop Floor Experience to Improve Students Conceptual Understanding of the Course Metrology & Quality Control;’, in Proceedings of the International Conference on Transformation in Engineering Education (ICTIEE-19) held at Hyderabad.
  • Patil, S. K. (2019), ‘Critical Overview On Optimization Techniques Of Friction Stir Welding Of Aluminium Alloys’, in Proceedings of International Conference on Industrial Engineering (ICIE-2019).
  • Patil, P.A. and Patil, S. K. (2018), Abrasive Flow Machining Technology for Fine Finishing: A Review, in Proceedings of 4th International Conference on Industrial Engineering (ICIE-2018)
  • Patil, S. K. (2018), Wear Prediction of Brake Friction Material Si3N4 / SiC2Ti3 and Stability Analysis of Break Squeal by Considering Contact Pressure - Temperature Effects using the Finite Element Method, in Proceedings of 4th International Conference on Industrial Engineering (ICIE-2018)
  • Patil, S. K. (2018), Model Predictive Control for 3D printers using State Space Modelling, in Proceedings of 4th International Conference on Industrial Engineering (ICIE-2018).
  • Patil, S. K. (2018), A fuzzy AHP-TOPSIS method for pipe material selection in sugar industry, in Proceedings of 4th International Conference on Industrial Engineering (ICIE-2018)
  • Patil, S. K. and Telsang M. T. and Kant, R. (2016), ‘Prioritize the Barriers of Knowledge Management adoption in Supply Chain by using Trapezoidal fuzzy AHP Method’ in the Proceedings of the 1st International Conference on Best Practices in Supply Chain Management to be held at College of engineering, Trivandrum from 22nd December to 23rd December 2016..
  • Patil, S. K. and Gaikwad H. (2017), ‘Analysis of Learning Styles of Engineering Students for Improving Engineering Education’ in Proceedings of the International Conference on Transformation in Engineering Education (ICTIEE-17) held at Vardhman College of Engineering Hyderabad
  • Patil, S. K. and Patil V. (2015), ‘The Selection of Enterprise Resource Planning (ERP) System by Using Analytical Hierarchy Process (AHP) Method’ in Proceedings of the 3rd International Conference on Industrial Engineering, (ICIE- 2015), S.V.N.I.T. Surat, pp. 139-143.
  • Patil, S. K. and Panchal D. (2015), ‘Customization of Macro for Bolted Connection in Hyper Mesh: A Literature Review’ in Proceedings of the 3rd International Conference on Industrial Engineering, (ICIE- 2015), S.V.N.I.T. Surat, pp. 1193-1197.
  • Patil, S. K. Patil V. and Gaikwad H, (2016), ‘Pipe Material Selection in Sugar Industry by Using fuzzy TOPSIS Method’ in Proceedings of the International Conference on Modern Era Research in Mechanical Engineering, (MERME-16), RIT, Rajaramnagar, pp.184-190.
  • Patil, S. K. Borchate, S. and Shukla, D. D. (2016), ‘Progress and Development of Silicon Based Ceramic Matrix Composite Brake Material for Military Aircraft's - A Preliminary Study’ in Proceedings of the International Conference on Modern Era Research in Mechanical Engineering, (MERME-16), RIT, Rajaramnagar, pp.40-44.
  • Patil, S. K. and Kant, R. (2013), ‘Forecasting the success of Knowledge Management adoption in Supply Chain’ in Proceedings of the IEEE International Conference on Industrial Engineering and Management, (IEEE-IEEM-2013), IEEE Bangkok.
  • Patil, S. K. and Patil, M. (2016), ‘Bobbin tool friction stir welding and knowledge based design review’ in Proceedings of the International Conference on Modern Era Research in Mechanical Engineering, (MERME-16), RIT, Rajaramnagar, pp.174-178.
  • Patil, S. K. and Kant, R. (2013), ‘Ranking the enablers of Knowledge Management adoption in Supply Chain by using Trapezoidal fuzzy AHP Method’ in Proceedings of the 2nd International Conference on Industrial Engineering, (ICIE- 2013), S.V.N.I.T. Surat, pp. 277-283.
  • Patil, S. K. and Ghorpade, V. (2016), ‘ADACOR architecture in Holonic Manufacturing System at shop floor level’ in Proceedings of the International Conference on Modern Era Research in Mechanical Engineering, (MERME-16), RIT, Rajaramnagar, pp.174-178.
  • Patil, S. K. and Patil, V. (2016), ‘Application of genetic Algorithm (GA)’ in Proceedings of the International Conference on Modern Era Research in Mechanical Engineering, (MERME-16), RIT, Rajaramnagar, pp.195-199.
  • Patil, S. K. and Patil, V. (2016), ‘Teaching- learning-based optimization algorithm’ in Proceedings of the International Conference on Modern Era Research in Mechanical Engineering, (MERME-16), RIT, Rajaramnagar, pp.96-100.
  • Patil, S. K. and Kant, R. (2012), ‘Identifying Critical Success Factors of Knowledge Management adoption in Supply Chain: A fuzzy DEMATEL approach’ in Proceedings of the IEEE International conference on Industrial Engineering and Management (IEE-IEEM-2012), IEEE Hongkong, pp.217-221.
  • Patil, S. K. and Telsang M. T. (2011), ‘Just in Time Manufacturing implementation issues and performance in selected Indian Industries’ in the Proceedings of the 1st International Conference on Industrial Engineering (ICIE-2011), SVNIT Surat.
  • Patil, S. K. and Telsang M. T. (2007), ‘Supplier Evaluation and Purchasing in JIT Enviornment – A survey of Indian Firms’ in the Proceedings of the International Conference on Advances in Manufacturing & Technology Management, IIT, Mumbai.
  • Patil, S. K. and Telsang M. T. (2006), ‘Relationship Between Work Culture Operational Performance in JIT Environment’ in the 3rd IEEE International conference on Management and Innovation and Technology (ICMIT-2006), IEEE Singapore.

D) National Conference

  • Patil, S. K. (2018), Experimental investigation on heat assisted drilling machine, Proceedings of 4th RIT Post Graduates Conference (RIT PG Con-18).
  • Patil, S. K. and Patil V. (2016), ‘Prioritizing the Pipe Material Properties for Sugar Industry by using fuzzy AHP Method’ in the Proceedings of the 2nd RIT National conference on Engineering Post-Graduates (RIT NConPG-16), RIT, Sakharale.
  • Patil, S. K. and Panchal D. (2016), ‘Redesigbning of Material handling system and layout analysis’ in the Proceedings of the 1ST National Conference on Innovation in Mechanical Enginnering, Sinhgad Institute of Technology, Lonvala.
  • Patil, S. K. and Panchal D. (2016), ‘Modal Analysis of Truck Chassis by Using HyperMesh & OptiStruct’ in the Proceedings of the 2nd RIT National conference on Engineering Post-Graduates (RIT NConPG-16), RIT, Sakharale.
  • Patil, S. K. and Kant, R. (2011), “Literature review of Knowledge Management practices in Supply Chain” in the 2nd National conference on Recent Advances in Manufacturing September 2011 proceedings, SVNIT Surat, pp.165-169.
  • Patil, S. K. and Telsang M.T. (2006), ‘Impact of Kanban and Supply Chain Management on Just in Time Manufacturing –An Empirical Study’ in the Proceedings of the National Conference on Emerging trends in Mechanical Engineering, BMS, College, Bnaglore

E) Patent

i) Patents (Awarded)

  • Title: Multi Sized Stapler Patent No. 201721024732
  • Design and development of multi operational Coconut machine- Patent no. 306023/15/11/2019

ii) Patents (Filed)

  • Title: Multi Sized Stapler Patent No. 285603/28/07/2016

Professional Distinctions

  • Journal Manager, Journal of Enginerring Education Transformations (JEET)
  • Life time member of ISTE

Key Research Projects

  • Experimental Investigation on machining of non conductive materials on Electro Discharge machining Process.
  • Heat assisted machining processes.