Mechanical Engineering

Home

Dr. S. S. Gawade

Dr. S. S. Gawade

Professor

Department:Mechanical Engineeering

Email:This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Education

Ph. D. (Mechanical Engineering) (2012)

Solapur University, Solapur

M.E. (Mech.-Design Engineering) (1997)

Shivaji University, Kolhapur

B.E. (Mechanical) (1989)

Shivaji University, Kolhapur

Experience

Teaching Experience: 29 Years

2012

Professor, Rajarambapu Institute of Technology, Sakharale

2010-2012

Associate Professor, Rajarambapu Institute of Technology, Sakharale

2000-2010

1998-2000

Sr. Lecturer, Rajarambapu Institute of Technology, Sakharale

1990-1998

Lecturer, Rajarambapu Institute of Technology, Sakharale

Research Area(s)

  • Vibration Engineering
  • Smart Materials
  • Experimental Mechanics
  • Tribology and Condition Monitoring

Key Publications

A) Publications (in international journals)

  • Samir B. Kumbhar, S. P. Chavan, S. S. Gawade, “ Adaptive tuned vibration absorber based on magnetorheological elastomer-shape memory alloy composite”, Mechanical Systems and Signal Processing(100), 208-223, 2018 (Elsevier Publication) H-Index 115, Impact Factor: 4.12. 
  • Samir B. Kumbhar, S. P. Chavan, S. S. Gawade, “Dynamic performance analysis of magnetorheological elastomer- shape memory alloy composite”, Journal of Vibration Engineering & Technologies, Vol.5, No.6, December 2017, pp. 557-568, H-Index- 9.
  • Samir B. Kumbhar, S. P. Chavan, S. S. Gawade,“Two Way Stiffness Tuning of Magnetorheological Elastomer- Shape Memory Alloy Composite”, Materials Today: Proceedings, (Elsevier Publication), Accepted for publication, H-Index- 4. 
  • Dr. S.S.Gawade, Swapnil P. Barale, “Design and Developement of test bed rail with anti vibration mount for vibration reduction of diesel engine”, International Journal of Mechanical Science and Technology, (2017).
  • Dr. S.S.Gawade, Neha A. Patil, Vivek G. Pandit, (2017). “Design and Analysis of EGR cooler bracket of medium duty diesel engine using finite element analysis method”, “Cummins Technical Report – Engine Business”, Paper Number – 00082125. 
  • Dayanand G. Potdar, Sanjay kumarS.Gawade, Samir B.Kumbhar “ Design of MR Elastomer based Adaptive Tuned Vibration Absorber”, Journal of Basic and Engineering Research (2015), pp.481-485
  • Sudhir M. Arali, S.S. Gawade, “ Computational analysis of Fuel Intake system for Biogas operated single cylinder 4- stroke spark Ignition Engine”(2014), Asian Resonance, Vol-III, Issue-IV.
  • S.S.Kumbhar, S.R.Kumbhar, Dr.S.S.Gawade” Performance Characteristics of Magnetorheological Elastomer Vibration Isolator” Journal of Automobile Engineering and Applications (2014)Volume I, Issue I  PP 1-4
  • P.B.Mali, Dr.S.S.Gawade “ Performance Investigation of A Five Dimensional Coupling” Indian Journal of research PARIPEX Volume ; 3 Issue ;6 June 2014 ISSN-2250-1991 PP 89-91
  • V.P.Patil,Dr.S.S.Gawade “ Experimental Analysis of Electrically Powered Active Hybrid suspension (EPAHS) for vehicle “ International Journal of Engineering research & Technology (IJERT) ISSN:22
  • Deepak C. Akiwate, Dr. S.S Gawade, “ Design and performance analysis of smart fluid Damper for gun recoil system” Advances in Mechanical, Material, Manufacturing, automobile aeronautical engineering and applied Physics (AMAEAP-2014) June 2014 
  • Dr. S. S. Gawade, “Design improvement of passenger car seat for child safety- FEA Approach”, IJERT Vol 4, Issue-06, June2015.
  • Dr. S. S. Gawade, Rahul Khot, Vinay Patil, “FEA Based Vibration of Weld joints to Determine Effect of Overlap Length of weld strength”, SRJIS, Vol.1, Issue-03, pp.-722-733.
  • Dr. S. S. Gawade, A. A. Jadhav, “A review on electro rheological (ER) Fluids and its Applications”, IJERT, Vol. 1, Issue 10, Dec. 2012, pp. 1-7.
  • Dr. S. S. Gawade, S. R. Kumbhar, N. M. Patil, “Experimental Evaluation of Performance of Magnetorheological Elastomers Bushes”, “International Journal of Mechanical Engineering”, ISSN: 2319-2240, Vol.2, Issue 1, Feb 2012, pp. 59-64. 
  • Dr. S. S. Gawade, J. M. Patil, S. H. Limaye, “Study on Behavior of Mechanical Face Seal Under various Parameters”, “International Journal of Innovation in Mechanical and Automobile Engg, ISSN: 2249-2968, Vol.1, Issue-2, September 2011. Pp. 1-6.
  • Dr. S. S. Gawade, Samir B Kumbhar, “Lateral Vibration Control of a drill by using MR Elastomer” International Journal of Engineering Research and Technology, Vol. 1, Issue 5, July 2012, pp 1-5.
  • Patil Rahul, S. S. Gawade, “Energy recovery study of electromagnetic regenerative shock absorber for vehicle suspension system”, Journal of Intelligent Material Systems & Structures, SAGE Publications.Impact Factor = 1.604.
  • Prof. S. S. Gawade, Dr. Bimlesh Kumar “Experimental Analysis of 2 DOF Semi-actives Suspension Quarter Car Model”, International Journal of Innovation in Mechanical and Automobile Engg, ISSN: 2249-2968, Vol.1, Issue-1, September 2011. p.p. 1-4.
  • Prof. S. S. Gawade, “Electro rheological Fluid Damper for Vibration Reduction in Rotary System”, International Journal of Fluid Engineering, ISSN: 0974-3138 Vol.3, 2011, p.p. 325-333.
  • Prof. S. S. Gawade, P. P. Awate, “Damage Detection in Cylinders by using Vibration and FEM Analysis Technique”, International Journal of Engg. Sciences Research (IJESR), ISSN: 2230-8504, e-ISSN: 2230-8512, Vol. 02, Issue- 4, July 2011.
  • Prof. S. S. Gawade, Y.S. Patil, S. R. Kumbhar, “Characterization and Response Analysis of Magneto rheological Elastomer”, International Journal of Engg. Sciences Research (IJESR), ISSN: 2230-8504, e-ISSN: 2230-8512, Vol. 02, Issue- 3, July 2011.
  • Prof S. S. Gawade, Amit V. Chavan, “Experimental and Finite Element Analysis of base Frame for Rigidity”, International Journal of Engg. Science and Technology (IJEST), ISSN: 0975-462, 2011, Vol.III, No. 10, p.p.7571-7576.
  • S. S. Gawade, M. B. Mandale, Dr. S. P. Chavan, “Sound intensity measurement over a simple structure like annular plate, International Journal of Emerging Trends & Applications in Engineering, Technology & Science, ISSN: 0974-3588, Jun. to Dec.2009,Vol. II, p.p. 661-665.
  • S. S. Gawade, S. R. Kumbhar, Dr. Bimlesh Kumar, “Theoretical & Experimental Evaluation of Damping Characteristics of Electrorheological Fluid Damper”, International Journal of Mechanical & Automobile Engineering (IJMAE), SERC, ISSN 0974-0231X, Fall Edition, Vol. 4, No. 5, Jun. 2009 to Aug. 2009, p.p. 17-22.
  • S. S. Gawade, S. R. Kumbhar, Dr. Bimlesh Kumar, “Theoretical & experimental analysis of Quarter Car model using ER damper”, International Journal of Emerging Technologies & Applications in Engineering, Technology &Sciences.(IJ-ETA-ETS), ISSN: 0974-3588,Vol. II, IssueII, Dec. 2008, p.p. 41-45.
  • Dr. S. S. Gawade, A. R. Wargante, “Experimental Analysis of Single cylinder Diesel  engine ”, IJERT, ISSN:2278:0181 Vol.2 issue 7, July 2013.
  • V. P. Patil, Dr. S. S. Gawade, “Experimental Analysis of an Electrically Powered Active Hybrid Suspension (EPAHS) for Vehicle”, IJERT, ISSN:2278:0181, Vol.2, Issue 7, July-2013.
  • Prof. P. P. Awate, Dr. Gawade S. S., “Damage detection in cylinders by using Vibration & FEM Analysis Technique”, Vol.02, Issue 03, July 2011.
  • Mr. Viraj H. Barge, Dr. S. S. Gawade, Mr. VinnayPatil, “Thermal-Structural Analysis & optimization of pressure vessel using finite element Analysis”, International Journal of Advanced Engineering research & studies, July-Sept-2013.

B) Publications /Presentation(in peer-reviewed conferences held in India)

  • Dr. S.S. Gawade, A.A Jadhav, D. A. Suryavanshi, “Dynamic Response analysis of ERF machine tool and engine mounts”, 13th International Conference on Vibration Problem [ICOVP], 29th Nov. to 2nd Dec. 2017. 
  • Dr. S.S.Gawade, Suryavanshi Deepak A, A.A. Jadhav. “Viable applications of electro-rheological fluids – A strategic review”, “MERME -17”.
  • Dr. S. S. Gawade, Magdum Rohit A. “Optimization of isolators of the exhaust   system used in heavy commercial vehicles” in international conference on computational intelligence & advanced manufacturing research (ICCIAMR 2014) Vol 2, ISBN-978-81-924031-7-5 organized by VELS University Chennaia.
  • Dr.S.S.Gawade, Swapnil A.Chavan Samir Kumbhar “ Dynamic Behaviour of  Composite Beam Embedded with Shape Memory Alloy Wires” International conference on Advanced nonmaterial’s& Emerging Engineering technologies” (ICANMEET-2013) Orgnized by Sathyabama University, Chennai, India in association with DRDO New Delhi India, 24th -26th July, 2013
  • Dr.S.S.Gawade, R.V.Pawar, V.S.Pawar “Condition Monitoring through Vibration Analysis and Wavelet Transformation to detect and correct the Machine Unbalance Fault ICTARME 2014 ISBN: 978-3-643-24819-03, Goa,18th May,2014
  • Dr.S.S.Gawade , Rahul J Kolekar “ Design and development of lift for an automatic car parking system” ICTARME 2014 ISBN: 978-3-643-24819-03, Goa,18th May,2014
  • Prof. S. S. Gawade, “Review on Vibration Analysis with Digital Image Processing”, International Conference on “New Development and Challenges in Engineering, Technology and Management” organized by yadavraoTasagaonkar Group of Institutes, Mumbai, on 22nd March, 2012. 
  • Prof. S. S. Gawade, V. S. Kadam, “Design and Development of Split Case Pump using Computational Fluid Dynamics”, 2nd international Conference on “Current Trends in technology” NUICONE-2011, organized by Institute of Technology, Nirma universityAhmadabad, 8-10 Dec. 2011.
  • S. S. Gawade, SantanuChoudhary, “Frequency Analysis of a Four Cylinder Diesel Engine Crankshaft by Using FEM & FFT Analyzer”, International Conference on Science, Engineering & Spirituality, organized by S.E.S. College of Engineering , Naval agar, April 1st& 2nd , 2010.
  • S. S. Gawade, Gawade P.G., “Experimental Validation of Vibration localization in Rotating and Stationary Member”, International Conference on Emerging Trends in Engineering- ICETE 2010,organized by J.J. Magdum College of Engineering, Jaysingpur, Feb. 20th -21st , 2010
  • S. S. Gawade, Patil P.J., “Theoretical and Experimental Analysis of bending Stress in Helical Gear of PIV Gear Box”, International Conference on Emerging Trends in Engineering- ICETE 2010,organized by J.J. Magdum College of Engineering, Jaysingpur, Feb. 20th -21st , 2010.
  • S. S. Gawade, S. R. Kumbhar, Dr. Bimlesh Kumar, “Design, Development & Testing of Electrorheological Fluid Damper for Road Vehicle Suspension System”, International Conference on “Advances in Mechanical Engineering”, organized by S.V.N.I.T., Surat, December 15 – 17, 2008.
  • S. S. Gawade, Vijay Patil, R. B. Patil, “Reverse Engineering – Tool for Rapid Product Development”, International Conference on “Advances in Mechanical Engineering”, organized by S.V.N.I.T., Surat, December 15 – 17, 2008.Analysis 
  • S. S. Gawade, Deepak Patil, K. D.Mali, “Dynamic Response Analysis of RectangularPerforated Plates with Varying Sizes of Circular Perforation holes”, 14th International Conference on “Sound & Vibration (ICSV14)”, Cairns, Australia, 9 – 12 July, 2007.  pp. 1 – 6. 
  • S. S. Gawade, S. R. Patil& Dr. Bimlesh Kumar, “Dynamic Response Analysis of Orifice Type Electrorheological Fluid Damper”, Proceeding of International Conference on “Advances in Machine Design and Industry Automation”, January 10 – 12, 2007, organized by College of Engineering, Pune. pp. 41 – 45.
  • S. S. Gawade, A. S. Patil, “Acoustic Intensity analysis of Gear Box and fault diagnosis of gear tooth by CBM”, Proceeding of International Conference on “Advances in Machine Design and Industry Automation”, January 10 – 12, 2007, organized by College of Engineering, Pune, p.p 66-70..
  • S. S. Gawade, Dr. Bimlesh Kumar & B. P. Ronge, “Some Theoretical and Experimental Studies of E.R. Fluid for Various Engg. Applications” in International Conference Advances in Materials Product Design and Manufacturing System (ICMPM - 2005) at B.I.T. Sathyamangalam, Tamilnadu 16 & 17th Dec.2005.
  • S.S. Gawade, Dr. Bimleshkumar& D. S. Chavan, “Dynamic Analysis of Pipe Conveyed Flowing Fluid”, (2002), 9th International Congress on Sound and Vibration Orlando, Florida, USA, Paper No. ID 146.
  • Gavade P. G. ,Dr. S. S. Gawade, Kumbhar S. B., Patil A.V. “Experimental validation of  Vibration localization in Rotating & stationary member”. Production of 3rd international conference on Advances in mechanical Engineering, jan 4-6 2010, organised by S. V. National Institute of Technology, Surat, Gujarat
  • Swapnil A. Chavan, Sanjaykumar S. Gawade, Samir B. Kumbhar ”Dynamic Behaviour of composite Beam Embedded with Shape memory Alloy wires ”, International Conference of Advanced Nanomaterials & Emerging Technologies, organized by Satyabhama University Chennai, India in association with DRDO, New Delhi, on 24th -26th  July 2013.
  • Dr. S. S. Gawade, Vasant Godbole, RajashriPatil, “Axial thrust in Centrifugal pumps Experimental analysis”, 15th International Conference on Experimental mechanics, Porto/Portugal, 22-27 July 2012.

C) National Conference

  • Dr.S.S.Gawade, Sagar V.R, “An experimental study of tribological behavior of journal bearing material under powder and graphite lubrication.”National Conference on recent trends in mechanical enginnering – 2017, Walchand College of engineering, Sangali, Paper ID: 17D06. 
  • Dr. S.S. Gawade, Neha A. Patil (2017). “A Review: Exaust gas recirculation mixer for diesel engine”, National Conference on recent trends in mechanical enginnering – 2017, Paper ID: 17H10. 
  • Dr. S.S. Gawade, S.S. Nikam (2017), “A Review: Analysis and Characterization of inflatable Material Structure”, Proceedings of 3rd RIT Post Graduates conference (RIT PG Con – 17), pp. 458 – 462. 
  • Dr. S.S. Gawade, Atul B. Korade, Amit Arora (2017), “Development and Simulation of an integrated (Dehumidification + Microwave) Drying system for fruits and vegetables”, (RIT NConPG – 17).  
  • Dr.S.S.Gawade, Swapnil Barale. “Internal combustion engines vibration and vibration isolation”, “National Conference on innovations in mechanical engineering” organized by mechanical engineering department, sinhgad institute of technology, Lonavala, Pune. (April-2017). 
  • Dr. S.S.Gawade, Suryavanshi Deepak A, A.A. Jadhav. “Use of smart fluids in anti-vibration mounts”, “RIT PGCON - 17”.
  • Dr.S.S.Gawade, Kiran Kadam, G.V.Kane& S.C. Joshi “ Fluid Thermal-Structural   Coupled Field Studies for RFQ Structure” National conference post graduate students RIT  NCon PG-16-MD 217, 2016, pp. 638-642
  • Dr.S.S.Gawade, S.R.Patil, S.B.Kubhar,  “ Analytical study of two way tuning of natural frequency of MRE-SMA beam”  National conference post graduate students RIT  NCon PG-16-MD 217, 2016, 
  • 3. Dr.S.S.Gawade, D.A.Aher, N.L.Soni, “Development of Mathematical Modeling for fretting fatigue failure”  National conference post graduate students RIT  NCon PG-16-MD 218, 2016 pp 643-651
  • Dr.S.S.Gawade, I.S.Mokashi “ Vibration Analysis of Defective Deep Groove Ball Bearing by Simulation and Experimental Approach  National conference post graduate students RIT  NCon PG-16-MD 213, 2016 pp 610-618
  • Dr.S.S.GawadeP.V.Pawar “Design and Analysis of steel Pallet for Weight  Optimization” National conference post graduate students RIT  NCon PG-15-ISBN-13:978-1512094169, 2016 pp 610-618
  • Dr.S.S.GawadeR.R.Chavan, R.K. Goyal “ Tribological behavior of non asbestos brake pad materials containing aramid fibre and potassium titanate whisker National conference post graduate students RIT  NCon PG-15-ISBN-13:978-1512094169, 2016 pp 494-49
  • Prof. S. S. Gawade, “Finite Element Analysis of Welded Curved Plate”, “National Conference on Advances in Chemical & Mechanical Engineering (NCACME-2012) organized by Gharda Institute of Technology, Lavel. 27 & 28 January 2012.
  • S.S.Gawade, Rajaram D. Patil, Santosh R. Patil, “Development of Hybrid Drive Train Using CVT in Urban Cars”, “National Conference on innovations in mechanical Engineering (IME-10)”, organized by J.T. Manahan College of Engineering, Faizpur, on Jan. 28th& 29th , 2010, p.p. 144. 
  • S.S.Gawade, Prashant Choudhary,  “Advanced Material For Automobile Leaf Spring”, “National Conference on innovations in mechanical Engineering (IME-10)”, organized by J.T. Manahan College of Engineering, Faizpur, on Jan. 28th& 29th , 2010, p.p. 139. 
  • S.S.Gawade, P. P. Awate, Dr. Bimleshkumar, “Optimum Design Of Composite Drive Shaft”, “National Conference on innovations in mechanical Engineering (IME-10)”, organized by J.T. Manahan College of Engineering, Faizpur, on Jan. 28th& 29th , 2010, p.p. 121. 
  • S.S.Gawade, N. M. Patil, Dr. Bimleshkumar, “ER and MR Technologies- Revolutionary Advances in Smart Materials”,  National Conference on innovations in mechanical Engineering (IME-10), organized by J.T. Manahan College of Engineering, Faizpur, on Jan. 28th& 29th , 2010, p.p. 111. 
  • S.S.Gawade, Yogesh P. Patil, S. R. Kumbhar, “Magnetorheological Elastomer: Promising Smart Material for vibration Control”, National Conference on innovations in mechanical Engineering (IME-10), organized by J.T. Manahan College of Engineering, Faizpur, on Jan. 28th& 29th , 2010, p.p. 103. 
  • S.S.Gawade, Shantanu Choudhary, N.M. Patil, “Dynamic Analysis of four Cylinder Diesel Engine Crankshaft By Using Holzer Method And Finite Element Method”, National Conference on innovations in mechanical Engineering (IME-10), organized by J.T. Manahan College of Engineering, Faizpur, on Jan. 28th& 29th , 2010, p.p. 20. 
  • S.S. Gawade, S.B.Kumbhar, V. P. Mali, “Vibration Analysis of Annular Disc With Periodic Uniform radial Cracks While Disc Is Clamped At Inner Edge And Free At our Edge”, Proceeding of National Conference on Advanced Trends in Mechanical Engineering(ATME-10), organized by P.V.P.I.T., BudhgaonSangli, on 30th March, 2010, p.p. 79-82.
  • S.S. Gawade, P. P. Awate, “Optimum Design of Composite Drive Shaft”, Proceeding of National Conference on Advanced Trends in Mechanical Engineering(ATME-10), organized by P.V.P.I.T., BudhgaonSangli, on 30th March, 2010, p.p. 67-71.
  • Prof. S. S. Gawade, A. M. Pirjade, “Effect of Actuator Dynamics in Electromagnetic Active suspension”, National Conference on Recent Advances in Product and Process Design (RTPPD-2009), 21-22 March 2009.
  • Prof. S. S. Gawade, S. J. Choudhari, “Dynamic Analysis of Four Cylinder Diesel Engine crankshaft”, National Conference on Recent Advances in Product and Process Design (RTPPD-2009), 21-22 March 2009.
  • Prof. S. S. Gawade, S. R. Patil, R. D. Patil, “Development of Hybrid Drive Train for Urban Car”, National Conference on Recent Advances in Product and Process Design (RTPPD-2009), 21-22 March 2009.
  • Prof. S. S. Gawade, J. V. Kothale, “Auto-Priming Unit for Typical End Suction Pump”, National Conference on Recent Advances in Product and Process Design (RTPPD-2009), 21-22 March 2009
  • Prof. S. S. Gawade, “Use of High Pressure Pumps in Desalination Plant”, National Conference on Recent Advances in Product and Process Design (RTPPD-2009), 21-22 March 2009. 
  • S. S. Gawade, S. R. Kumbhar, Dr. Bimlesh Kumar, “Comparative Study of Different ER Dampers”, Proceedings of 2nd National Conference on Recent Developments in Mechanical Engineering (YANTRA-2007), organized by College of Engineering, Pandharpur on 23 – 24 Dec. 2007. pp. 1 – 6.
  • Prof. S. S. Gawade, “Sound Pressure Measurement over a Circular Plate”, Proceedings of National Conference on Innovations in Mechanical Engineering (IME-07), J. T. Mahajan College of Engineering, Faizpur, 29 – 30 March, 2007.
  • S. S. Gawade, S. R. Kumbhar, Dr. Bimlesh Kumar, “ER Fluids – Review of Properties, Performance & Application Development”, Proceedings of National Conference on Innovations in Mechanical Engineering (IME-07), J. T. Mahajan College of Engineering, Faizpur, 29 – 30 March, 2007. 
  • S. S. Gawade, S. R. Kumbhar, Dr. Bimlesh Kumar, “Review of Different ER Fluids Performance & Application Developments”, Proceedings of National Conference on Innovations in Mechanical Engineering (IME-07), J. T. Mahajan College of Engineering, Faizpur, 29 – 30 March, 2007. pp. 123-127.pp. 117-121.
  • S. S. Gawade, S. R. Kumbhar, Dr. Bimlesh Kumar, “MR Fluids – Review of Properties, Performance & Application Development”, Proceedings of National Conference on Innovations in Mechanical Engineering (IME-07), J. T. Mahajan College of Engineering, Faizpur, 29 – 30 March, 2007. pp. 155. 
  • S. S. Gawade, K. B. Waghulde, “Stress analysis of Tube sheet by Finite Element &photo elasticity method”, Proceedings of National Conference on Innovations in Mechanical Engineering (IME-07), J. T. Mahajan College of Engineering, Faizpur, 29 – 30 March, 2007. pp. 26-30.
  • S. S. Gawade, Jadhav P. M., Kanai R. A., “Intelligent data mining and personalization using artificial neural network for customer relationship management”, National conference on “Factory Automation, Robotics and Soft Computing”, organized by NIT, Warangal, 18 – 19 January 2007. pp. 246 – 250. 
  • S. S. Gawade, S. R. Kumbhar,“ER & MR Fluids – Controllable Fluids in Engineering Applications”, Proceedings of National Seminar on Intelligent & Emerging Technologies in Mechanical & Automobile Engineering (NSITMAE), Institute of Technology and Management, Gurgaon, Harayana, January 5 & 6, 2007. 
  • S. S. Gawade, S. R. Kumbhar,“A Survey of Different Actuator Technologies”, proceedings of National Conference on “Trends & Advances in Mechanical Engg.” (TAME-06) organized by YMCA Institute of Engineering, Faridabad, Harayana, Dec. 9 – 10, 2006.
  • S.S. Gawade, Patil S. R., “Preparation & finding out properties of different compositions of Electrorheological fluid used for vibration control”, Third National conference for Research scholar on “Application of Emerging Technologies”, 29 – 30 March 2006, organized by Abhiyamaan College of Engineering, Hosur. pp. 94. 
  • S.S. Gawade, S. R. Patil, Dr. Bimlesh Kumar, “Application of Electrorheological Fluid in Vibration Control”, National Conference on “Recent Developments in Mechanical Engg. – Yantra – 2005”, organized by College of Engineering, Pandharpur, 23 – 24 December 2005. pp. 95-98. 
  • S.S. Gawade, B. R. Jadhav, S.R.Patil, “Stress analysis of complicated components using ESA & FEM techniques”National conference on recent development in Mechanical Engineering at C.O.E Pandharpur, Dist. Solapur. 23-24 Dec 2005, p.p 99-103.  
  • S.S. Gawade, M. S. Deshmukh, “Analysis of compressor internal suspension system(2004)” National Conference – Machine Design, College of Engg. SangamnerDist – Ahmadnagar. 
  • S. S. Gawade, B. R. Jadhav, R. A. Kanai &katu U.S., “Simulation and structure analysis of connected rod on fine boring fixture – a Case Study”, National Conference on “Recent Trends in CAD/CAM/CAE”, 21 – 23 June – 2004, organized by R.I.T Sakharale, p.p. 1.11 – 1.16. 
  • S.S. Gawade, Dr. Bimleshkumar, “Stress Analysis of a Helical Coil Automobile Spring Using Strain Gauges(2002)”, Proceedings of the National Seminar on Modern Trends in Automobiles (NSMTA 2002), R. I. T. Sakharale, 323-327.
  • S.S. Gawade, Dr. Bimlesh Kumar, “Vibration Control by Using Active Control in Two Wheeled Vehicles Suspension System” (1999), Proceedings of Three Days National Seminar on Two Wheelers of Tomorrow, B. N. College Of Engg., Pusad, 33-40.
  • S.S. Gawade, Dr. Bimleshkumar, “Various Environmental Aspects and Its Effects on EnggEquipments” (1999), Proceedings of National Conference on Towards Excellence in Technical Education in 21st Century, B. N. College Of Engg., Pusad 278-281.
  • S.S. Gawade, Dr. Bimlesh Kumar, “Advanced Tribological Materials and Its Coatings for Wear Protection” (1998), Proceedings of 2 Days National Workshop on Industrial Tribology, V.P. Dr. P. G. H College of Engg. & Technology, Bijapur, 28-33.
  • S. S. Gawade, Milind Patil, “Concurrent Engg.”, (2004), National Seminar on “Automation in Mechanical Engg.”, organized by College of Engg.,Faizpur Dist. Jalgaon.
  • S. S. Gawade, Milind Patil, “Sensing, detecting, measuring & recognizing devices in automation” (2004), National seminar on “Automation in Mechanical Engg.”Organized by College of Engg. Faizpur Dist. Jalgaon.
  • Dr. S. S. Gawade, Santosh R. Patil, Atul S. Patil “Control of Robotic Finger with Electro rheological fluid”, BVDU, Pune Res.j. -Vol X Number 1, April 2013.
  • Dr. S. S. Gawade, M. B. Mandale, “Sound Pressure measurement over a circular plate”, National Conference on innovations in Mechanical Engineering , on march 29-30,2007, pp128.
  • Dr. S. S. Gawade, V.S. Kadam, “Use of CAD and CAE in Design of horizontal split case pump for New series”, NCRADME 2010.
  • S. S. Gawade, Bimlesh Kumar “Preparation & Testing to identify response analysis of electrorheological  fluid ”.
  • S. S. Gawade, D.C. Patil , K. D. Mali, “Dynamic response analysis of rectangular perforated plates ”, National Conference on Recent Advances in Design Engineering (RADE), organized by Manipal Institute of Technology, on Feb 22-24, 2007 pp116.
  • S. S. Gawade, S. S. Mane, “Review on Vibration analysis with Digital image processing ”.
  • S. S. Gawade, U. S Kashid,”Use of High Pressure pump for disalination plant ”.

D) Book Published

i) Book

  • Published Monogram “Electro-rheological fluid damper for a road vehicle suspension system” by LAMBERT Academic Publishing, Germany,2014

Professional Distinctions

  • Received a grant of Rs 9.55 lakhs under RPS by AICTE, New Delhi.
  • Published Monogram “Electro-rheological fluid damper for a road vehicle suspension system” by LAMBERT Academic Publishing, Germany,2014
  • Fellow Member- The Institution of Engineers (India), Kolkata
  • Life Member - Indian Society for Technical Education (ISTE), New Delhi.
  • Life Member- Association for Machines and Mechanisms(AMM)
 

Key Research Projects

  • Development and Simulation of an integrated (Dehumidification + Microwave) drying system for fruits and vegetables
  • Dynamic performance analysis of magneto-rheological elastomer beam embedded with shape memory alloy wire
  • Coupled Field analysis of radio frequency quadrupole structure using Finite Element method. (RRCAT, Indore)
  • Evaluation and strength enhancement of child safety restraint system for passenger vehicle – FEA approach
  • Investigation and reduction in Vibration level of 8 HP single cylinder diesel engine
  • Experimental Evaluation of Performance of Magnetorheological Elastomer (MRE) Bushing used for Vehicle suspension
  • Design and Development of Smart Fluid Machine Tool Mount
  • Design, Characterization and Testing of Electromagnetic energy Harvester for Vehicle Suspension
  • Design, development & testing of Smart Fluid damper for road vehicle suspension system
  • Dynamic Response analysis of Electrorheological fluid damper
  • Dynamic Response of An Electromagnetic Active Suspension Taking Into Consideration The Effect of Electromagnetic Actuator Dynamics
  • Condition Monitoring & Fault Diagnosis of I.C. Engines by Vibration Analysis
  • Design and Development of Special Purpose Machine (SPM) to Manufacture the Sinuous Spring
  • Dynamic analysis of pipe containing flowing fluid with & without vibration absorber