Mechanical Engineering

Home

Mr. B. R. Jadhav

Mr. B. R. Jadhav

Associate Professor

Department:Mechanical Engineeering

Email:This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Education

Ph. D. (Electro Discharge Machining) (Pursuing) 

VTU, Belgaum.

M.E. (Production) (1997)

Shivaji University, Kolhapur

B.E. (Mech) (1989)

Shivaji University, Kolhapur

Experience

Teaching Experience - 29 Year

2011

Associate Professor - Department of Mechanical Engineering, Rajarambapu Institute of Technology, Rajaramnagar.

2001-2011

Lecturer in Selection grade Mechanical Engineering Department, Rajarambapu Institute of Technology, Rajaramnagar.

1997-2001

Senior Lecturer in Mechanical Engineering Department, Rajarambapu Institute of Technology, Rajaramnagar.

1990-1997

Lecturer in Mechanical Engineering Department, Rajarambapu Institute of Technology, Rajaramnagar.

Research Area(s)

  • Non Conventional machining
  • Casting  & Welding Technology
  • Machine tools & processes
  • Material Science & Metallurgy

Key Publications

A) Publications (in international journals)

  • BaliramR.Jadhav, Dr. M. S. Sohani and S.S.Shirguppikar “Experimental investigation of various process parameters of powder mixed electro discharge machining process for machining of Al-Si alloy”, International Journal of Mechanical Engineering and Technology, Vol 10 Issue 08 (2019): pp. 127-136. (Scopus H-Index - 13).
  • BaliramR.Jadhav, Dr. M. S. Sohani and S.S.Shirguppikar“Performance investigation of powder mixed electro discharge machining of hypoeutectic Al –Si alloy using brass electrode”,International journal of materials forming and machining processes,Vol 06 Issue 02 (2019): pp. 31-45
  • BaliramR.Jadhav, Dr. M. S. Sohani “Experimental Investigation of AL-SI Alloy using PEDM Machine”International Journal of Science Technology & Engineering,Vol 07 Issue 05, (November 2020)
  • Baliram R.Jadhav & Vaibhav Sutar Journal name- International journal of materials engineering innovation.(Inder science publisher) Paper name-Implementation of topsis optimization technique in comparative analysis of conventional tig and activated tig welding of stainless steel 304L. (H index- 10)Vol.12 issue 3 page no. 188-206
  • Jadhav B.R. “Parametric Optimization of AL-SI plate on EDM using Brass Electrode” in “international journal of advances in Machining and forming Operation.” Journal issue January-June 2011, ISSN NO: 0975-4784, page No- 51-56.
  • B.R.Jadhav,”Electrical discharge machining (EDM)-A Review”, International journal of engineering sciences & research.ISSN:2230-8504, Dec.2011.
  • B.R.Jadhav, M.V.Kavade,”Experimental study of Al-Si Alloy plate on EDM using tungsten electrode”. International journal of advanced engineering research & studies, E-ISSN 2249-8974, (222-227), Dec.2011.
  • D.R.Vhatkar, B.R.Jadhav, an “Experimental study of the effect of powder mixed dielectric on machining performance in EDM”. International journal of multidisciplinary research ISSN: 2277-9302, (44-48) Oct.2012.
  • S.S.Mahadik, B.R.Jadhav,”Equipment performance improvement using maintenance through vibration analysis in sugar plant condition base”. International journal of advanced engineering technology, ISSN 0976-3945, Dec.2012.
  • D.R.Vhatkar, B.R.Jadhav, “Experimental study on parametric optimization of high carbon steel (En-31) by using silicon powder mixed dielectric EDM process”., International journal of advances in management, technology & engineering sciences.ISSN:2249-7455 (16-20) Jan.2013.
  • Investigation and analysis of cold shut casting defect and defect reduction by using 7 quality control tools, International journal of advanced engineering research and studies, ISSN:2249-8974- 2013-2014
  • Experimental setup of fountain type electroplating cell and application of CFD tool for uniform bump plating on semiconductor wafer, International journal of emerging technology and advanced engineering, 2250-2459, 2013-20
  • Jadhav B.R.  and “Investigation and analysis of cold shut casting defect and defect reduction by using 7 quality control tools” International journal of advanced engineering research and studies, 2249-8974
  • Jadhav B.R.  and Husalmal “Experimental setup of fountain type electroplating cell and application of CFD tool for uniform bump plating on semiconductor wafer” International journal of emerging technology and advanced engineering, 2250-2459, 2013-14.
  • Jadhav B.R. and Jadhav J.S.”Experimental study of effect of cutting parameters on cutting force in turning process” International Journal of Innovative Research in Advanced Engineering vol. 1,2014
  • Jadhav B.R. and Jadhav P.S. “A study on mixing of composite solids in the three dimensional turbula MIXER” International Journal of Advanced Engineering Research and studies E-ISSN2249-8974.
  • Jadhav B.R. and Sutar B.D. “A simulation Approach to Improve Performance in Foundry Industry “International Journal for Research in Applied Science & Engineering Technology” vol.3 May 2015 ISSN: 2321-9653.
  • Jadhav B.R. and Jakhale P.P. “ Optimization of surface roughness of Alloy steel by changing operational parameters and insert geometry in turning process” International Journal of advanced Engineering Research and studies. E-ISSN2249-8974
  • Jadhav B.R. and Joshi S. “Casting defects reduction and productivity improvement in Automotive Component” International Journal for Research in Applied Science & Engineering Technology” vol. 3 June 2015 ISSN:2321-9653
  • Jadhav B.R. and Magdum s. “ Design and development of Casting by simulation Technique for Yield Improvement in Foundry Industry” International Journal for Research in Applied Science & Engineering Technology” vol. 3, June 2015 ISSN-9653.

B) Publications /Presentation(in peer-reviewed conferences held in India) 

  • Jadhav B.R. and Omkar Kadam “Re-equipping of gear hobbing machine: numerical control innovation based and servomechanism” 7th IRF International conference,27th April -2014,Pune,India,ISBN:978-93-84209-4.
  • Jadhav B.R. and Rahul Botare “Optimization of cutting parameters to minimize machining time in CNC turning of 34CRNIMO6 alloy steel using taguchi method” proceedings of 27th April-2014, Pune,India,ISBN:978
  • Jadhav B.R. and Jagdale A. H.”Comparative assessment of wiper and standard insert on surface roughness in hard turning of EN-9 Steel” proceedings of 10th IRF International Conference  Pune,India,ISBN:978 -93-84209-23-0

C) National Conference

  • Operation” in national symposium on “Future trends in refrigeration Technology” at WCE Sangli on 24th to 25th Jan. 1998.
  • Jadhav B.R. and M.V. Khot “Heating and cooling utility of domestic Refrigerator” in national symposium on “Future trends in refrigeration technology” at WCE Sangli on 24th to 25th Jan. 1998.
  • Jadhav B.R. and Dr. S.V. Karmare “Energy saving in domestic refrigeration by Forced convection” Published in proceedings of national conference on Energy conservation and management at R.T.I. Sakharale during 11th to 13th July 2001.
  • Jadhav B.R. and R.A. Kanai “Influence of machining conditions on performance characteristics” Published in the proceedings of the national conference on “Recent trends in CAD/CAM/CAE” during 21st to 23rd June 2004. At RIT Sakharale (Rajaramnagar) Dist- Sangli.
  • Jadhav B.R. and U.S. Katu “Simulation and structural analysis of connecting rod on fine boring fixture –A case study” Published in the proceedings of the national conference on “Recent trends in CAD/CAM/CAE” during 21st to 23rd June 2004. At RIT Sakharale (Rajaramnagar) Dist- Sangli.
  • Jadhav B.R. and R.A. Kanai “Lesser fabrication process for MEMS” Published in the proceedings of the national conference on “Recent trends in CAD/CAM/CAE” during 21st to 23rd June 2004. At RIT Sakharale (Rajaramnagar) Dist- Sangli
  • Jadhav B.R. and S.S. Gavade “Stress analysis of complicated component by using ESA and FEM TECHNIQUE” Published in Proceeding of National conference in Recent Trends on Mechanical Engg., YANTRA-2005, C.O.E. Pandhrpur,25-26 Nov.;2005.
  • Jadhav B.R. and Dr. Bimleshkumar “Electrical discharge Machining –A state of art review” Published in National Conference on Recent Advances in “Product & Process Design” 21st -22nd March 2009 at RIT Sakharale (Rajaramnagar) Dist- Sangli.
  • Jadhav B.R. and Dr. S.V. Karmare “Parametric Optimization of AI –sI plate on EDM” Proceedings of National Conference on “Advances in Mechanical and Electrical Engineering” during 2nd to 3rd July 2010.At Annasaheb Dange College of Engineering and Technology Ashta, Dist- Sangli
  • Jadhav B.R.  and Patil R.D. “Multi performance characteristics optimization of powder mixed EDM OF al-si Alloy using taguchi based grey relational analysis-A Literature review “ Department of Mechanical Engineering, Rajarambapu Institute of technology, Sakharale Maharashtra India, 978-93-84935-56-6
  • Jadhav B.R.  and Patil R.D. “Multi performance characteristics optimization of powder mixed EDM OF al-si Alloy using taguchi based grey relational analysis“ Department of Mechanical Engineering, Rajarambapu Institute of technology, Sakharale Maharashtra India
  • Jadhav B.R.  and Magdum A. J. “Improving lead time of project life cycle using lean approch - A case study of manufacturing industry” Department of Mechanical Engineering, Rajarambapu Institute of technology, Sakharale Maharashtra India.
  • Jadhav B.R. and Chougule s. “ Overall Equipment Effectiveness (OEE) Improvement through Raw Material Planning” National Conference for Engineering Post Graduates RIT NConPG-15.ISBN-13:978-1512094169
  • Jadhav B.R.   and Gumaste J.S. “Balancing of compressor pack/test line using MOST technique” Proceeding of 2nd National Conference for Engineering Post Graduate, RIT NConPG-16.
  • Jadhav B.R. and Mahant P.R. “Finding the root causes of the material shortage in the manufacturing company” National  Conference on Mechanical, Material and Manufacturing Engineering , NIE Mysuru, Karnataka, India,May23-24,2016.
  • Jadhav B.R. and Amrut Yadav ,”effect of submerged arc welding process paramerters on IS-2062 Grade-B Steel”,Proceeding of the 3rd RIT PGCON 2017.
  • Jadhav B.R. and Onkar Dhole ,” Throughput improvement of crankline by reducing changeover time using SMED technique: a case study”,NCRTME-2017.
  • Jadhav B.R. and Sohel Patel ,” Improving OEE of wire drawing process by lean tool”,NCRTME-2017.
  • Jadhav B.R. and Swagat Londhe,” Investigation of CVD & PVD coated inserts on CNC turning of EN353 steel”,NCRTME-2017.
  • Jadhav B.R. and Abhishek Patil,”Experimental investigation of EN-19 steel”,RIT PGCON-2018.
  • Jadhav B.R. and Tushar Rupnaver,”Optimization of casting process parameter through simulation”,11th conference on recent innovation in science , engineering and management on 7th april 2018,ISBN:978-93-87793-19-4.
  • Jadhav B.R. and Prashant Salunkhe,” Experimental Investigation of Parameters Influencing on FSW of AA6061 and AA6063”,RIT PGCON-2018.

Professional Distinctions

  • Life Member ISTE
  • Member ISAMPE (Indian society for advancement of Materials & processing engineering)

Key Research Projects

  • Experimental study of the effect of powder mixed dielectric on machining performance in EDM. 
  • Equipment performance improvement using maintenance through vibration analysis in sugar plant condition base.
  • Experimental study on parametric optimization of high carbon steel (En-31) by using silicon powder mixed dielectric EDM process.
  • Investigation and analysis of cold shut casting defect and defect reduction by using 7 quality control tools.
  • Experimental setup of fountain type electroplating cell and application of CFD tool for uniform bump plating on semiconductor wafer.
  • Investigation and analysis of cold shut casting defect and defect reduction by using 7 quality control tools.
  • Experimental setup of fountain type electroplating cell and application of CFD tool for uniform bump plating on semiconductor wafer.
  • Re-equipping of gear hobbing machine: numerical control innovation based and servomechanism.
  • Optimization of cutting parameters to minimize machining time in CNC turning of 34CRNIMO6 alloy steel using taguchi method.
  • Comparative assessment of wiper and standard insert on surface roughness in hard turning of EN-9 Steel.
  • Experimental study of effect of cutting parameters on cutting force in turning process” International Journal of Innovative Research in Advanced Engineering vol. 1,2014
  • Multi performance characteristics optimization of powder mixed EDM OF al-si Alloy using taguchi based grey relational analysis-A Literature review.
  • Multi performance characteristics optimization of powder mixed EDM OF al-si Alloy using taguchi based grey relational analysis.
  • Improving lead time of project life cycle using lean approch - A case study of manufacturing industry.
  • A study on mixing of composite solids in the three dimensional turbula MIXER.
  • A simulation Approach to Improve Performance in Foundry Industry .
  • Optimization of surface roughness of Alloy steel by changing operational parameters and insert geometry in turning process.
  • Casting defects reduction and productivity improvement in Automotive Component.
  • Design and development of Casting by simulation Technique for Yield Improvement in Foundry Industry.
  • Overall Equipment Effectiveness (OEE) Improvement through Raw Material Planning.
  • Balancing of compressor pack/test line using MOST technique.
  • Finding the root causes of the material shortage in the manufacturing company.
  • Effect of submerged arc welding process parameters on IS-2062 Grade –B steel.
  • Investigation of CVD & PVD coated inserts on CNC turning of EN353 steel.
  • Improving OEE of wire drawing process by lean tool.
  • Throughput improvement of crankline by reducing changeover time using SMED technique: a case study.